01 02 03 04 05 06 07 08 09 10 12 13 14 15 16 17 18 19 20 21
22 23 24 25 26 27 28 29 30 31
1 2
Product specifications and operating procedures : N version
EN
3
Coffee capsule filling
(using Nespresso genuine capsules):
N version
capsule seat
N version of the
capsule adapter
1.Put the capsuleinto the
capsuleupsidedown.
N- prece 2. Put the N version of the adapter, the
outer wall of the adapter is aligned
with the groove on the inner wall of
the base and gently pressed.
Extracting coffee
1. Insert the capsule holder of the Nespresso coffee capsule into the bottom of the main unit, ensuring tightening.
2. Put the product into the cup, then rotate the top cover to remove it, pour the appropriate amount of cold water, and then
rotate the top cover.
3. Connect the product to the DC12V power supply, then press the switch to start the product and wait for 5-7 minutes for a
cup of coffee.
1 2 3
Coffeepowder filling:
Product specifications and operating procedures : Coffee powder
Receptacle for
coffee powder
1. Usethe spoon to add the coffeepowder
N version
capsule seat
02
2. Use the cap to close the coffee powder container.
To Next Page
Loading...