HiBREW H4A - Page 3

COMPONENT VIEW
HOW TO RESTORE THE FACTORY SETTINGS.
SELF TEST.
2
DG capsule Adaptor
(without grid holes at the bottom)
NS capsule Adaptor
(with grid holes at the bottom)
Stainless steel powder cup
NS capsule Holder
AC power adapter
(optional)
Car charger
USB cable
(for power bank)
Stand
(optional)
Travel case
(optional)
Cover
Water Tank
Upper button
（heater control)
Lower button
(pump control)
Power Input Jack with
Rubber Cover
Coffee Cup
Positioning rim
Press and hold the upper and lower buttons for 3 seconds simultaneously, the upper button will flash in red
twice and the lower button will flash in blue twice .
Factory reset is done.
1) the default brewing time will be restored.
2) if applicable, the default temperature setting will be restored.
When the product is powered, the upper button will flash in red twice and the lower button will flash in blue
twice to compete self test, then get into stand-by mode.
HOW TO RESTORE THE FACTORY SETTINGS.
Pressand hold the upper and lower buttons for 3 seconds simultaneously, the upper button will flash in red
twice and the lower button will flash in blue twice .
Factory resetis done.
1)the default brewing time will be restored.
2)if applicable, the default temperature setting will be restored.
SELF TEST.
When the product is powered, the upper button will flash in red twice and the lower button will flash in blue
twice to compete self test,then get into stand-by mode.
COMPONENT VIEW
DGcapsuleAdaptor
(without grid holes at the bottom)
NScapsule Holder
Stainlesssteel powder cup
NScapsuleAdaptor
(with grid holes at the bottom)
Carcharger
USB cable
(for power bank)
Cover
Water Tank
Upper button
(heater control)
Lower button
(pump control)
Power Input Jack with
Ru bber Cover
Positioning rim
Coffee Cup
Travel case
(optional)
EN
HiBREW
ACpower adapter
(optional)
2
Stand
(optional)