3
Pour either boiling or cold water
into the water tank,
(Do not exceed Max level).
Close the water tank cover.
Connect the product to DC12V
If Cold water is filled,
Press the upper button to heat up water for extracting coffee.
If Boiling/Hot water is filled,
press the lower button to extract coffee directly.
OPERATING INSTRUCTION FOR DIFFERENT ADAPTERS
Remove the water tank cover
and the coffee cup
and the adapter.
Put it into the
NS capsule adapter.
DG capsule adapter NS capsule adapter
Ground Coffee
Insert a NS capsule
into the Ns capsule
holder.
Insert the DG capsule
into its adapter.
Add 10 grams ground coffee into
the metal cup, gently press
properly, then cover the lid.
Tips: the product may be
jammed if too fine or too much
coffee was added.
Insert the metal cup into the DG
adapter.
Attention: HOT Surface.
Tighten the capsule adapter then install the coffee cup
to align with the positioning rim or put it on a stand.
1st step
2nd step
4th step
5th step
3rd step
4th step 4th step
2nd step 2nd step
OPERATING INSTRUCTION FOR DIFFERENT ADAPTERS
DGcapsule adapter
1st step
2nd step
Insertthe DGcapsule
into itsadapter.
3rd step
4th step
NS capsule adapter
Ground Coffee
2nd step
4th step
Remove the water tank cover
and the coffeecup
and the adapter.
2nd step
Inserta NScapsule
into the Nscapsule
holder.
Put it into the
NScapsuleadapter.
Add 10gramsground coffeeinto
the metal cup,gently press
EN
properly,then coverthe lid.
TIPS:the product may be
jammed if too fine or too much
coffee was added.
Insertthe metalcup into the DG
adapter.
A Attention: HOT Surface.
Poureither boilingor cold water
into the water tank,
(Do not exceed Max level).
Close the water tank cover.
4th step
Tighten the capsuleadapterthen install thecoffeecup
to align with the positioning rim or put it on a stand.
5th step
0
Connectthe product to DC12V
If Cold water is filled,
Pressthe upper button to heat up water for extractingcoffee.
If Boiling/H0t water is filled,
pressthe lower button to extract coffeedirectly.
3
To Next Page
Loading...