EasyManuals Logo

Hidea HDF6.8 User Manual

Hidea HDF6.8
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Operations
Forward or reverse
1. Place the throttle grip in the fully closed position.
2. Move the gear shift lever quickly and rmly from neutral to forward or reverse.
WARNING
When operating in reverse, go slowly. Do not open the throttle more than half. Otherwise the boat
could become unstable, which could result in loss of control and an accident.
Stopping engine
Before stopping the engine, first let it cool off for a few minutes at idle or Iow speed. Stopping the
engine immediately after operating at high speed is not recommended.
Procedure
1. Push and hold the engine stop button until the engine comes to a complete stop.
2. After stopping the engine, tighten the air vent screw on the fuel tank cap and set the fuel cock
lever or knob to the closed position, if equipped.
3. Disconnected the fuel line if you are using an external fuel tank.
NOTE
If the outboard motor is equipped with an engine stop switch lanyard, the engine can also be
stopped by pulling the lanyard and removing the lock plate from the engine stop switch.
21

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hidea HDF6.8 and is the answer not in the manual?

Hidea HDF6.8 Specifications

General IconGeneral
BrandHidea
ModelHDF6.8
CategoryOutboard Motor
LanguageEnglish

Related product manuals