EasyManua.ls Logo

HidrateSpark STEEL User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Quick Start Guide
We’re here to support you.
If you ever need to contact us, here’s how:
Chat with us on our website
hidratespark.com
Email
support@hidrate.me
In App
Settings > Help
For more information and best practices,
please visit hidratespark .com/pages/guide to
review the user manual.
ABC D
DESCRIPTION
REV DATE
HI-004-010
004 Feb. 11, 2020
A. Chug Lid
B. Bottle Body
C. Sensor Puck
D. Charging Cable
GLOW REMINDERS
SUPPORT
When setting up your bottle you have the choice to
pick your reminder glow color in the Bottles section
of the App.
• Please see hidratespark.com/pages/guide to view all
glow reminders and further information.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
The FCC requires the user to be notied that any
changes or modications made to this device that are
not expressly approved by HIdrateSpark may void the
user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
The user’s manual or instruction manual for an
intentional or unintentional radiator shall caution the
user that changes or modications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment. In cases where the manual is provided
only in a form other than paper, such as on a computer
disk or over the Internet, the information required by
this section may be included in the manual in that
alternative form, provided the user can reasonably be
expected to have the capability to access information
in that form.
FCC
DO NOT overload or squeeze the sensor puck as it
can damage internal electronics.
Your HidrateSpark Steel uses a built-in rechargeable
li-ion battery. Bottle includes a magnetic USB
charging cable for all your charging needs.
Product is NOT designed for hot liquids. Use only
with cold liquids.
Not for use with carbonated or pulpy beverages.
Prior to drinking, make sure the lid is properly
threaded to the body and screwed on completely.
DO NOT overll. Fill liquids below the threads to avoid
accidental spilling.
DO NOT microwave or freeze.
DO NOT use cleaners containing bleach, chlorine,
abrasives and/or harsh chemicals.
DO NOT continue to use if product is damaged.
DO NOT carry bottles containing liquid in bags to
help prevent accidental opening.
Recommended for indoor and ofce use only.
Recommend recalibration if your bottle encounters a
drop impact.
ATTENTION
This device complies with Innovation, Science and
Economic Development Canada’s licence-exempt
RSSs. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
Cet appareil est conforme aux ux RSS exemptés
de licence d’Innovation, Science et Développement
économique Canada. Lopération est soumise aux
deux conditions suivantes:
(1) Cet appareil ne doit pas provoquer d’interférence; et
(2) Cet appareil doit accepter toute interrence, y
compris les interférences susceptibles de provoquer
un fonctionnement indésirable de l’appareil.
Radiation Exposure Statement: This equipment
complies with the IC RSS-102 radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a
minimum distance of 20 cm between the radiator and
your body.
Énoncé dexposition aux rayonnements: Cet
équipement est conforme aux limites d’exposition
aux rayonnements ioniques RSS-102 Pour un
environnement incontrôlé. Cet équipement doit être
installé et utili avec un Distance minimale de 20 cm
entre le radiateur et votre corps.
ISEDC
Question and Answer IconNeed help?

Do you have a question about the HidrateSpark STEEL and is the answer not in the manual?

HidrateSpark STEEL Specifications

General IconGeneral
MaterialStainless Steel
InsulationDouble-walled vacuum insulation
ConnectivityBluetooth
App CompatibilityHidrateSpark App (iOS and Android)
CategorySmart Water Bottle
Battery LifeUp to several months (coin cell battery)
FeaturesTracks water intake, glows to remind you to drink, integrates with fitness trackers

Summary

Safety and Warnings

General Safety Precautions

Lists essential warnings for product operation, handling, and usage, including liquid types and cleaning.

Regulatory Compliance

ISEDC Compliance Canada

Details compliance with Canadian Innovation, Science and Economic Development regulations and radiation exposure.

FCC Compliance and Interference

Explains FCC rules, interference guidelines, operation conditions, and user modification warnings.

Product Support and Resources

Customer Support Contact

Provides channels for contacting support via website chat, email, and in-app.

User Guide and Best Practices

Directs users to online resources for detailed user manuals, guides, and glow reminder information.

App and Bottle Setup

Download and Set Up the App

Instructions for downloading the HidrateSpark app, creating an account, and setting up the bottle.

Sensor Puck and Bottle Maintenance

Sensor Puck Disassembly and Assembly

Step-by-step guide on how to remove and attach the sensor puck to the bottle body.

Cleaning Instructions

Details on how to wash the bottle body and lid, and clean the sensor puck.

Battery Charging Instructions

Procedure for charging the sensor puck using the magnetic USB cable and indicators.