To Next PageTo Next Page
Need help?Do you have a question about the HIdRos WHK Series and is the answer not in the manual?
Outlines potential hazards associated with the unit's operation.
Explains common safety symbols used in the manual.
Describes how to identify the unit using its rating plate.
Highlights risks related to toxic substances, especially refrigerants.
Provides instructions and warnings for handling refrigerants safely.
Provides an overview of the heat pump's design and capabilities.
Lists key performance and specification data for the units.
Defines the operational boundaries and conditions for the unit.
Explains how the unit produces domestic hot water.
Essential safety rules for installation.
Lists required PPE for installation and maintenance.
Guidelines for safely moving and handling the unit.
Specifies installation site requirements and clearances.
Lists essential checks before powering on the unit.
Details the settings for various safety devices.
Explains the meaning of icons displayed on the control panel.
Describes the function of each button on the control panel.
Procedures for powering the unit on.
How to view and adjust operational set points.
How to access and manage alarms.
Accessing service menus for advanced settings.
Configuring operational time schedules.
Instructions for setting the unit's date and time.
Important safety and regulatory information for maintenance.
Guidelines for periodic inspection and maintenance.
Routine checks to ensure proper operation.
Steps for safely disconnecting the unit.
Guidelines for environmentally sound disposal of the unit.
Table of common faults, causes, and solutions.
General
