SNOWPAD REVERSE OSMOSIS GUIDE
Ver 2-2023
INSTALLATION PROCEDURE
Installing the feed water tap:
1..Install Tee Fitting and Feed Water Valve as per diagram.
2..Wrap threads of Feed Water Valve and Tee Fitting with Teflon
tape.
3..Connect White Feed Water Tubing from unit to Feed Water Valve.
4..Install the Feed water valve Tee fitting, and then connect to
source water.
NOTE: Use only a supply as Feed Water, hot water will damage your
unit. Softened Feed Water will extend the life of the RO Membrane ·
Installing the feed water tap video:
https://youtu.be/WewK8S1kqQs
HOME
INSTALLATION
REQUIREMENTS
INSTALLATION
GUIDE
REPLACEMENT OF
FILTERS
PROCEDURE
FILTERS
DISCONNECTION
PROCEDURE
To Next Page
Loading...