Need help?Do you have a question about the Hidrotek Snowpad and is the answer not in the manual?
General| Brand | Hidrotek |
|---|---|
| Model | Snowpad |
| Category | Water Filtration Systems |
| Language | English |
Details required water tap connection (½" thread) and 13amp plug socket.
Instructions for connecting the reverse osmosis drain to a sink drain system.
Lists all items included in the product packaging for installation.
Specifies the tools needed for proper installation, such as a cutter and drill.
Provides a schematic illustrating the functional flow and connections of the RO system.
Step-by-step guide on how to connect the unit to the main water supply.
Instructions for mounting and connecting the dedicated purified water faucet.
Procedure for installing the drain clamp on the drain pipe for wastewater.
First step to close the main water supply valve before replacing filters.
Safely unplug the unit from the electrical socket before filter maintenance.
Open the RO faucet to drain any residual water from the system.
Guide on removing old cartridges and inserting new ones.
Plug the appliance back into the electricity socket after replacing filters.
Press 'select' to initiate the cartridge capacity reset process.
Press 'reset' to confirm and complete the cartridge capacity reset.
Instructions to set the capacity for subsequent filter cartridges.
Open the main water supply shut-off valve to resume water flow.
Run water for 15 minutes to flush new filters and ensure optimal performance.
Close the water supply shut-off valve to stop water flow before disconnection.
Unplug the water filter adapter from the electrical socket.
Open the RO faucet to drain any remaining water from the filter system.
Method for pressing the ring to disconnect the tubing from fittings.
Details on each filter stage, its function, and estimated replacement intervals.
To Next Page