2
Pairing
1. To pair with a source device, remove the earbuds from the
charging case, at which point the earbuds will enter
pairing mode.
2. Open the Bluetooth function menu on your device and
select HIFIMAN SVANAR WIRELESS. Once paired, you will
hear "Connected.”
Important:
You have 3 minutes to connect the earbuds to your device,
otherwise the earbuds will exit and automatically power off .
Leave the right earbud in the charging case while removing
the left earbud, at which point it will automatically enter
single-sided mode. The left one taken out from the charging
case will enter one-sided mode automatically. To return to
stereo, simply remove the right earbud from the
charging case.
Use Left Earbud Only
Use Both Earbuds
Leave the left earbud in the charging case while removing the
right earbud, at which point it will automatically enter
single-sided mode. The right one taken out from the charging
case will enter one-sided mode automatically. To return to
stereo, simply remove the left earbud from the charging case.
Use Right Earbud Only
To Next Page
Loading...
