Need help?Do you have a question about the High Altitude Science Eagle Flight Computer and is the answer not in the manual?
Procedure for connecting the power cable to the flight computer via the power terminal.
Guide on connecting sensor wire harness plugs to the keyed sensor ports.
Instructions for inserting and securing the micro SD card for data saving.
Explains how the computer powers on and the initial GPS initialization process.
Guidance on mounting the flight computer to ensure clear sky view for the GPS receiver.
Information on placing the flight computer near satellite trackers and cellular devices.
Recommendation for using Energizer Ultimate Lithium AA batteries for cold temperatures.
Details on how flight data is saved to a .txt file on the micro SD card.
Step-by-step guide to import .txt data files into Microsoft Excel.
Troubleshooting steps for issues with the System LED not flashing correctly.
General| Processor | ARM Cortex-M4 |
|---|---|
| Microcontroller | STM32F4 |
| Memory | 192KB RAM |
| Communication Interfaces | USB, UART, I2C, SPI |
| Sensors | IMU, GPS, Barometer |
| IMU | MPU9250 (9-axis: accelerometer, gyroscope, magnetometer) |
| GPS | U-blox MAX-M8Q |
| Data Logging | MicroSD card |
To Next Page