Need help?Do you have a question about the High End Systems SolaSpot Pro 1500 and is the answer not in the manual?
General| Light Source | LED |
|---|---|
| Animation Wheel | Yes |
| Strobe | Yes |
| Pan Range | 540° |
| Tilt Range | 270° |
| Voltage | 100-240VAC, 50/60Hz |
| Framing Shutters | Yes |
| Gobo Wheels | 2 |
| Colors | CMY color mixing |
| Control Protocol | DMX512 |
| Dimming | Yes |
Details on compliance with Federal Communications Commission rules.
Details on 3-pin and 5-pin XLR cable connectors for linking fixtures.
Instructions and diagram for connecting fixtures to a DMX controller.
Explanation and construction of a DMX terminator to prevent data reflection.
Detailed explanation of navigating and using the fixture's control board menus.
Procedure for setting the DMX starting address on the control board.
Accessing and displaying device running times and timer passwords.
Options for displaying DMX control values or setting display modes.
Displaying the temperature on the display board in Celsius or Fahrenheit.
Displaying the device's software version.
Configuration options including status, movement reverse, pan degree, and encoders.
Functions for resetting the device and testing channels or manual control.
Selecting and managing preset programs, playback, and scene settings.
Guide to creating presets by combining scenes into programs and assigning them to partitions.
Steps to enter and navigate the fixture's preset menu system.
Explanation of master/slave relationships for preset playback and scene assignment.
Options for setting fixtures as master, slave, or reverting to DMX control.
Designating a fixture for standalone playback or as a master for automatic program execution.
Procedure to designate fixtures as slaves to playback master presets.
Reverting from auto program to DMX receive mode for console control.
Designating fixtures to playback scenes based on audio triggers.
Creating or editing scenes by adjusting fixture parameters and DMX values.
Selecting DMX values for specific fixture parameters to edit scene settings.
Setting the duration for each scene before the next scene is triggered.
Setting the crossfade time applied to parameters when a scene is triggered.
Capturing scene parameter values directly from DMX input.
Editing factory set programs by sequencing scenes or testing program steps.
Assigning preset programs to program partitions for slave playback.
Capturing multiple scenes from DMX values input to the fixture.
Error message indicating malfunction in PAN yoke movement circuit or motor.
Error message indicating malfunction in TILT head movement circuit or motor.
Error message for Gobo Wheel 1 magnetic-indexing circuit or stepping-motor malfunction.
Error message for Gobo Rotation 1 magnetic-indexing circuit or stepping-motor malfunction.
Error message for Gobo Wheel 2 magnetic-indexing circuit or stepping-motor malfunction.
Error message for Focus magnetic-indexing circuit or stepping-motor malfunction.
Error message for CMY magnetic-indexing circuit or stepping-motor malfunction.
Error message for Iris magnetic-indexing circuit or stepping-motor malfunction.
Error message for Zoom magnetic-indexing circuit or stepping-motor malfunction.
Error message for Color magnetic-indexing circuit or stepping-motor malfunction.
To Next Page