High-Flying HF-LPB100

Other manuals for High-Flying HF-LPB100

Quick Start Guide29 pages

Need help?

Do you have a question about the High-Flying HF-LPB100 and is the answer not in the manual?

Summary

Product Overview

General Description and Features

Overview of module capabilities, architecture, and key features.

Device Parameters

Details technical specifications including wireless, hardware, and software.

Hardware Interface Details

Describes pin definitions, electrical specs, mechanical size, and antenna options.

Evaluation Kit and Applications

Details on the evaluation kit and typical usage examples.

Functional Description

Wireless Networking Modes

Explains AP, STA, and AP+STA wireless network configurations.

Data Transmission Modes

Details transparent transmission and UART frame schemes.

Configuration, Security & Firmware

Covers encryption, parameter configuration, and firmware update methods.

GPIO, PWM, and Socket Functions

Describes GPIO/PWM control and multi-TCP link capabilities.

Operation Guideline

Web Configuration Interface

Guides users through accessing and navigating the module's web interface.

System and Mode Settings

Configuring system status, work mode, and STA network parameters via web.

AP and Other Settings

Configuring AP mode network parameters and serial/TCP settings.

Account, Software Update & Management

Managing accounts, software updates, restarts, and restore functions.

Usage Introduction & Debugging Tools

Introduction to module usage, debugging software, and network connection methods.

AT+INSTRUCTION INTRODUCTION

Configuration Mode & AT Command Overview

Steps to enter configuration mode and overview of AT command syntax.

AT+Instruction Set List

Lists available AT commands and their brief descriptions.

Basic AT Commands Examples

Examples of AT commands for echo control and Wi-Fi work mode settings.

UART & Network AT Commands

Details AT commands for UART configuration and network operations like PING.

TCP;UDP & Wi-Fi AT Commands

Covers AT commands for TCP/UDP, Wi-Fi STA/AP settings, and firmware upgrades.

Package Information

Reflow Profile & Handling

Recommended reflow soldering profile and SMT handling instructions.

Shipping Information

Details on packaging and shipping information for the module.

Hardware Reference Design

GPIO;PWM & Network Commands

Network GPIO Commands

Commands for controlling GPIO via network, including OUT and GET operations.

Network PWM Commands

Commands for setting and querying PWM channel output and saving settings.

Hexadecimal Network Commands

Commands for reading module port status using hexadecimal data.

HTTP Protocol Transfer

HTTP AT Commands

Details AT commands for setting HTTP server, request type, path, and connection.

HTTP Examples & Raw Data

Provides examples of HTTP parameter settings and sending raw data.

Sending HTTP Request by AT Command

Steps for sending HTTP requests using AT commands.

References

Tools, Guides & SDK

Links to tools, guides, SDKs, and other relevant documentation.

Contact Information