26 27
EN EN
Useful information Useful information
C C
7
Close the maintenance ap as shown.
WARNING:
Do not clean with bare hands as the heat exchanger ns are
sharp. You risk injuring your hands.
Cleaning the humidity sensor
Inside the machine are humidity sensors that detect whether
the laundry is dry or not.
To clean the sensors:
1
Open the door of the machine.
2
If the machine is still hot after a drying cycle, wait for it to cool
down.
3
Using a soft cloth moistened with cleaning vinegar, wipe the
metal surfaces of the sensor and dry them.
IMPORTANT:
Clean the metal surfaces of the sensor 4 times a year.
Do not clean the metal surfaces of the sensor with metal
tools.
WARNING:
Given the risk of a re and explosion, do not use cleaning
solutions and products, or similar products when cleaning the
sensors.
Cleaning the inside of the door
IMPORTANT:
Remember to clean the inner surface of the door after each
drying process.
Open the door and clean all the internal surfaces and the door
gasket with a soft, damp cloth.
To Next Page
Loading...
