5 EN
Using the appliance
B
Installation
Removing the transit bolts
X X4 4
X
4
1
2
3 4
1
Before using the washing machine, remove the 4 transit bolts and rubber washers
located at the rear of the machine. Failure to comply with this instruction may cause strong
vibrations, a high level of noise and damage to the machine, rendering the warranty null and
void.
2
Loosen the transit bolts by turning them anti-clockwise with a suitable spanner.
3
Remove the transit bolts by pulling them straight out.
4
Fit the plastic blanking plugs supplied with the accessory kit in the holes left once the
transit bolts have been removed. Keep the transit bolts for later use.
PLEASE NOTE : Remove the transit bolts before using
the machine for the first time. The warranty does not
cover faults resulting from the machine being used with
the transit bolts still in place.
To Next Page
Loading...
