6 EN
Using the appliance
B
Adjusting the feet/adjusting the adjustable housings
1
1
Do not install the machine on a surface that could prevent air from flowing underneath
(e.g. a carpet).
• For quiet and vibration-free operation, install the machine on a firm surface.
• The machine can be levelled using the adjustable feet.
• Loosen the plastic lock nut.
X4
2
3
2
To increase the height of the machine, turn the feet clockwise. To reduce the height of
the machine, turn the feet anti-clockwise.
• Once the machine is level, re-tighten the lock nuts by turning them clockwise.
3
Never place wedges made of cardboard, wood or any other similar material under the
machine to level it.
• When cleaning the floor around the machine, be careful not to change the levelling.
To Next Page
Loading...
