To Next PageTo Next Page
Need help?Do you have a question about the High Street TV Verti Steam Pro and is the answer not in the manual?
Connect the poles and insert the main pole for press pad setup.
Fill the water tank by pulling the stopper and prepare for operation.
Maintain 2cm distance from fabric and use tension for steaming delicate items.
Touch the fabric with the steamer for vertical ironing of ironable fabrics.
Illustrations of the accessories available for the steam product.
Visual guide of actions to avoid during operation to ensure safety.
Information on initial use, potential smoke or odor, and factory testing.
Details on steam delivery time, pump noise, and auto-off function.
Recommendations for demineralised water and warnings against additives.
Critical warnings about hot steam, scalding risk, and handling precautions.
The Verti Steam Pro™ is a versatile garment care system designed for both steaming and vertical ironing, offering a convenient way to refresh and de-wrinkle fabrics. Its primary function is to deliver steam to garments, effectively removing creases and odors, while also providing a vertical ironing capability for a more pressed finish.
The device operates by heating water to produce steam, which is then directed onto fabrics. This steam relaxes the fibers, allowing wrinkles to smooth out. The Verti Steam Pro™ is equipped with a pump system that ensures a consistent flow of steam. For initial use, it may take a few seconds for steam to be delivered, and the pump might sound slightly louder during this period, gradually quieting down as steam flow stabilizes. A key safety feature is the Auto-Off function; if the unit is not used for 15 minutes, it will automatically switch to standby mode. To reactivate, simply press the trigger, and the unit will take approximately 45 seconds to return to operating temperature.
The Verti Steam Pro™ is designed for ease of use, with a straightforward setup process. To begin, the press pad needs to be assembled by connecting the first and second poles, then inserting the main pole. The water tank is filled by pulling out the stopper, adding water, and then re-inserting the stopper. Once filled, the device is turned on by pressing and releasing the trigger. It takes about 45 seconds for the unit to heat up and be ready for use, indicated by a "Ready" light.
For steaming delicate fabrics, the device should be held approximately 2cm away from the fabric. This method is ideal for refreshing garments and removing light wrinkles without direct contact. The manual advises referring to page 13 of the full instructions for more detailed guidance on steaming various delicate materials.
When it comes to vertical ironing, which is suitable for ironable fabrics, the device can be touched directly to the fabric. This allows for a more direct application of heat and steam, similar to traditional ironing but in a vertical orientation. The press pad is essential for vertical ironing, providing a stable surface against which to press the garment. The accessory section shows how to attach and detach various components, including a lint remover, which is recommended for most garment steaming operations to help prevent water spots. The device also features a mechanism to pull fabric to tension, aiding in achieving a smoother finish during vertical ironing.
The manual emphasizes the importance of using demineralized water for best results. It explicitly warns against using water containing additives such as starch, perfume, aromatic substances, or softeners, as well as condensation water from sources like tumble dryers, refrigerators, or air conditioning units. Such waters can lead to spitting, brown discoloration, and premature aging of the appliance due to organic waste materials concentrating under heat.
Safety is a paramount concern. Users are cautioned that the steam is hot and can scald if applied directly to the skin. While the stainless steel press plate is not heated internally, the steam passing over it will make it hot after a few minutes of use, though it will not reach the same temperature as a traditional steam iron soleplate. It is crucial to always unplug the steamer before filling the water tank or attaching and detaching any accessories. The press pad must be in place for vertical ironing to ensure proper function and safety.
While the manual does not detail specific cleaning or descaling procedures in this quick start guide, it does provide insights into practices that contribute to the longevity and optimal performance of the device. The recommendation to use demineralized water is a key maintenance aspect, as it prevents mineral buildup that can clog the steam vents and affect steam quality over time. Avoiding additives in the water also prevents internal corrosion and discoloration.
The inclusion of a lint remover accessory suggests a focus on maintaining fabric quality and preventing residue transfer. Although not explicitly a device maintenance feature, its use helps keep the steaming head clean from lint and fibers, which could otherwise accumulate and affect steam distribution. The design of the water tank, with its pull-out stopper, facilitates easy filling and presumably easy draining, which can be part of a routine to prevent stagnant water.
The Auto-Off function, while primarily a safety feature, also contributes to the device's lifespan by preventing unnecessary continuous operation and potential overheating when left unattended. The fact that the product is fully tested at the factory and may contain a little water in the tank upon purchase indicates a commitment to quality control, implying a robust design that can withstand initial use. The advice regarding initial smoke or odor and particle discharge also prepares the user for normal break-in behavior, preventing unnecessary concern and ensuring the user understands these are not signs of malfunction.
General| Power | 1500W |
|---|---|
| Cord Length | 5m |
| Steam Output | 25g/min |
| Accessories Included | measuring cup |
| Accessories | Brush Attachment, Measuring Cup |
