OPERATOR MANUAL
- 1 -
About the Operator Manual
Important
This Operator Manual describes the features and safe operation
of a High Voltage Test Set. The instructions are intended to be
clear and simple, but the operator must be trained and qualified
according to established procedures for the use of this type of
equipment.
This Operator Manual is organized to provide information on the CDS Series in steps that
familiarize the new operator with the entire scope of operation of this test set.
Section 1: Specifications and Controls.
Section 2: Setup and Operation.
Section 3: Performing Special Operations.
The Functions, Features, and Specifications of the CDS Series of Capacitor Discharge/Hipot Cable Fault
Locators are also discussed in the CDS Brochure available from High Voltage, Inc.
To Next Page
Loading...