High Voltage PFT Series User Manual

Safety, Operation, and Procedure Instructions for the PFT Series of
AC Hipots
Danger- Lethal Voltages:
Equipment to be used by trained personnel only
This Operator Manual contains instructions for the operation of a High Voltage power source. The operator of this equipment
must use good judgement and follow all safety precautions noted in this guide to ensure the protection of himself and others in
close proximity to the test area. Failure to follow the instructions could result in injury or
death. Proper grounding of the test set must be done prior to connecting this unit
to a power source.
PFT
SERIES
Please Refer to
Documentation
Before Operation

High Voltage PFT Series Specifications

General

Output Waveform	Pure Sine Wave
Protection	Overload, Short Circuit, Over Temperature
Frequency Range	50Hz / 60Hz (±0.5%)
Protection Level	IP20
Cooling Method	Fan Cooled
Communication Interface	RS485