Need help?Do you have a question about the HIGHLEAD GC6-28-1 and is the answer not in the manual?
General| Number of Needles | 1 |
|---|---|
| Needle Bar Stroke | 36 mm |
| Stitch Type | Lockstitch |
| Needle | DPx17 |
| Max Sewing Speed | 2, 000 SPM |
| Hook | Large Capacity Rotary Hook |
| Motor Type | Clutch motor |
Details key operational parameters like speed, stitch length, and dimensions.
Guide on how to properly mount and align the sewing machine motor.
Instructions for connecting the clutch lever to the sewing machine pedal.
Steps for cleaning, examining, and oiling the machine before operation.
Procedure for correctly inserting and replacing sewing machine needles.
Recommendations for suitable needle, thread, and material combinations.
Procedure for initial operation and breaking in a new or stored sewing machine.
Step-by-step guide for threading the needle and bobbin.
Instructions on adjusting the bobbin winder for proper thread winding.
How to set stitch length and operate the reverse feeding function.
Adjusting the presser bar height for optimal fabric handling.
Fine-tuning presser foot pressure based on material thickness.
Critical steps for adjusting needle and bobbin thread tension for proper stitching.
Adjusting the tension and stroke of the thread take-up spring.
Adjusting thread guides and tension for optimal stitch quality.
Crucial procedure for setting the timing between the needle and hook.
Instructions for removing and installing the rotating hook assembly.
Setting the correct vertical height of the feed dog.
Adjusting the horizontal position of the feed dog.
Setting the timing relationship between feed dog movement and needle motion.
Adjusting the timing for the tension discs to open.
Procedures for adjusting the oil pump and rotating hook lubrication.
Guidelines for routine cleaning of feed dogs, hook, and oil pump screen.
Components of the arm bed and associated parts.
Parts related to the needle bar and thread take-up lever system.
Components of the arm shaft drive mechanism.
Parts constituting the lower shaft drive system.
Components responsible for regulating stitch settings.
Parts that control the fabric feeding process.
Components related to the presser foot assembly.
Parts involved in the machine's oil lubrication system.
Components of the oil reservoir and related accessories.
Parts of the bobbin winding mechanism.
List of included accessories with the sewing machine.
To Next Page