EasyManua.ls Logo

Highlight MAGNUM 2300 SD-U - User Manual

Highlight MAGNUM 2300 SD-U
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATION MANUAL
MAGNUM 2300 SD-U
UNIFORM CASE SEALER
SERIAL NUMBER
Please refer to the serial number in all correspondence with Highlight or any Highlight
Distributor. This identifies your machine and will help in our ability to quickly and
efficiently respond to your needs.
Version 1.2 March 2008
Question and Answer IconNeed help?

Do you have a question about the Highlight MAGNUM 2300 SD-U and is the answer not in the manual?

Summary

General System Information

SYSTEM SPECIFICATIONS

Details machine dimensions, electrical requirements, and production capabilities.

SYSTEM OVERVIEW PRINTS

Diagrams illustrating the machine's overall layout and dimensions.

SYSTEM DESCRIPTIONS

Labels and identifies key components of the case sealing system.

TAPE HEAD & TAPE OVERVIEW PRINTS

Diagrams showing tape head dimensions and tape roll specifications.

TAPE HEAD DESCRIPTIONS

Identifies the various parts of the tape head assembly.

TAPE THREADING DIAGRAM

Illustrates the correct procedure for threading tape through the head.

LIMITED WARRANTY

Outlines the terms and conditions of the manufacturer's warranty.

Installation Instructions

SAFETY PRECAUTIONS

Essential safety guidelines to prevent injury and equipment damage during operation.

MACHINE PLACEMENT

Guidance on positioning the machine for optimal operation and safety.

MACHINE SET-UP

Step-by-step instructions for assembling and preparing the machine for use.

Operation Instructions

SAFETY PRECAUTIONS

Reinforces critical safety measures before and during machine operation.

PRE-OPERATION ADJUSTMENTS

Procedures for adjusting machine settings before starting operation.

Tape Head Adjustment

Detailed steps for adjusting the tape head for optimal performance.

Checking the tape tension

Instructions for verifying and adjusting tape tension.

Spring Adjustment

Guide on adjusting the main spring for tape wipe-down.

Tape Leg Adjustment

How to adjust the tape 'legs' for even application on box ends.

Adjusting Length of Front Tape Leg

Procedure to modify the length of tape applied to the front of the box.

Adjusting Length of Rear Tape Leg

Procedure to modify the length of tape applied to the rear of the box.

OPERATOR PANEL

Description and function of the machine's control panel buttons and indicators.

MACHINE OPERATIONS

Steps and procedures for operating the case sealing machine.

Maintenance

PREVENTIVE MAINTENANCE

Guidelines for regular maintenance to ensure longevity and performance.

Lubrication

Information regarding lubrication requirements for machine components.

Drive Belt Replacement

Instructions on when and how to replace drive belts.

Tape head

Maintenance procedures for the tape head, including fastener checks and blade cleaning.

Troubleshooting

TROUBLESHOOTING GUIDE

A guide to identify and resolve common machine problems and defects.

Tape curling

Troubleshooting steps for tape curling issues during application.

Roller Limit Stop Adjustment

Adjusting roller limits to ensure proper tape contact with boxes.

Electrical References

ELECTRICAL PARTS LIST AND PRINTS

List of electrical components and related diagrams for the machine.

Mechanical References

MECHANICAL PARTS LIST AND PRINTS

Comprehensive list of mechanical parts with their corresponding part numbers and quantities.

Notes

Highlight MAGNUM 2300 SD-U Specifications

General IconGeneral
BrandHighlight
ModelMAGNUM 2300 SD-U
CategoryFood Saver
LanguageEnglish