highwood Hamilton - User Manual

For information on Care and Cleaning or to Register your
highwood® product, please visit www.highwood-usa.com.
PAGE 1 OF 2
TOOLS INCLUDED
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all bolts are started.
Once all bolts are inserted, go back & tighten all the bolts.
Adirondack Collection
Hamilton Bench
Counter Height 4ft
Assembly Guide
HARDWARE INCLUDED
AD-BEN-HM2
09.13.2022
A
1/4-20 x 1.25"
Qty: 2
B
1/4-20 x 1.5"
Qty: 2
C
1/4-20 x 2.0"
Qty: 12
D
1/4-20 x 3.0"
Qty: 2
1) Attach Back to Seat using
(2) C Bolts going through Seat Supports into
the Back.
2) Attach Back to Seat using
(2) A Bolts going through Back Slat into the
Seat.
Seat
Seat Support
Back Slat
A
C
C
Seat Support
Back

Summary

Assemble Bench Seat and Back

Attach Back to Seat with C Bolts

Attach the back to the seat using two C bolts through the seat supports into the back.

Attach Back to Seat with A Bolts

Attach the back to the seat using two A bolts through the back slat into the seat.

Assemble Bench Arm and Leg Components

Attach Arm Assembly to Seat and Back

Attach the arm assembly to the seat using two C bolts and to the back using one B and one D bolt.

Install Leg Assembly with Footrest and Rung

Place dowel in footrest/rung into leg assembly, then attach leg assembly to seat using C bolts.

highwood Hamilton Specifications

General

Material	High-Density Polyethylene (HDPE)
Weather Resistance	Yes
UV Protection	Yes
Color	Black
Maintenance	Low maintenance, easy to clean