Need help?Do you have a question about the Hikari H93S and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Connectivity Technology | Wireless |
| Operating Range | 10 meters |
| Model | H93S |
| Connectivity | Bluetooth |
| Platform | Android, iOS |
| Compatibility | Android, iOS |
| Charging Time | 2 hours |
| Usage Time | 10 hours |
Manages parameter levels, password entry, speed adjustment, and stitch size.
Details functions of Identify, Left/Right, Add-Subtract, Reinforcing, and Fixed Seam keys.
Switches between sewing modes like free, one-stitch, multi-stitch, and circulation.
Controls presser foot lift, thread clamping, and related functions.
Manages soft start, scissors, anti-nest, and close stitch functions.
Selects needle stop position and enters teaching/debug modes.
Resets system settings to default configurations.
Displays system status and manages planning states and parameters.
Configures lower thread detection and aging test modes.
Accesses various test modes like motor angle and pedal calibration.
Manages resetting parameters, copying configurations, and specific modes.
Allows detailed configuration of pattern designs, including stitch and gauge data.
Defines pinouts for servo motor power, encoder, and stepper motor connections.
Specifies connections for serial communication and USB charging.
Defines pins for operation box, solenoids, and needle bar light.
Details pin assignments for the pedal and anti-bird's nest solenoid.
To Next Page