EasyManua.ls Logo

HIKE CREW HICPSBT - User Manual

HIKE CREW HICPSBT
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Portable
Water Heater
USER GUIDE
HICPSBT

Questions and Answers

  • J
    Jason BrownAug 6, 2025
    What to do if my HIKE CREW HICPSBT Water Heater device does not power on?
    • S
      smillerAug 6, 2025
      If the HIKE CREW Water Heater device does not power on, ensure the DC fuse in the cigarette lighter fitting is not blown. Also, verify that adequate DC power is available and check if the battery requires recharging.
  • S
    Suzanne SmithAug 12, 2025
    How to fix HIKE CREW Water Heater when water is not flowing through the shower head?
    • A
      Amy BennettAug 12, 2025
      If the water is not flowing through the shower head of your HIKE CREW Water Heater, ensure the appliance is switched on and there is sufficient water available. Also, check that the pump fuse and the DC fuse in the cigarette lighter fitting are not blown, and that adequate DC power is available. Finally, make sure the shower flow switch is in the “on” position.
  • A
    Ann AdamsAug 17, 2025
    What to do if the burner will not light on my HIKE CREW HICPSBT Water Heater?
    • T
      Tiffany SmithAug 18, 2025
      If the burner of your HIKE CREW Water Heater will not light, check that the gas cylinder is turned on and contains gas. Also, make sure water is flowing from the shower head and that the water is not too hot.
  • D
    Donald HallAug 25, 2025
    How to make HIKE CREW HICPSBT water less hot?
    • G
      Gregory BakerAug 25, 2025
      If the water from your HIKE CREW Water Heater is too hot, check that the gas Temperature Control is set to MIN and check the source water temperature. Also, ensure the water flow on the shower head is set to the outer ring and check the water restrictor plug fitted inside the shower head handle. You may remove the hose connection and pull out the plug, retaining it for future use if needed.
  • T
    Thomas SullivanAug 30, 2025
    How to make HIKE CREW HICPSBT water hotter?
    • B
      bpearsonAug 30, 2025
      If the water from your HIKE CREW Water Heater is not hot enough, check that the gas Temperature Control is set on MAX and check the source water temperature. You can also recycle the water through the device back into the source reservoir and through the appliance again.

Summary

Safety Precautions

Safe Use Requirements

Checking for Gas Leaks

Instructions and warnings for detecting and preventing gas leaks from the portable water heater.

Safe Use Locations

Safety Features

Details on the safety mechanisms including high temperature, water flow, tilt switches, and fuse protection.

Package Contents

Product Overview

Front View

Identification of key components visible on the front of the portable water heater.

Back View

Identification of key components visible on the back of the portable water heater.

Control Panel

Detailed explanation of the control panel functions and indicators.

Connection Points and Attachments

Connection Points

Diagram and listing of all input and output connection ports on the device.

Attachments

List and visual identification of all included accessories and attachments.

Operational Modes

Battery Mode

How to operate the unit using its internal battery power.

Charging Mode

How to operate and charge the unit simultaneously using the AC/DC adapter.

Direct Power Mode

How to operate the unit using the 12V DC adapter without charging the battery.

Initial Set Up

Using the Shower

Faucet Setup

Storing Your Portable Water Heater

Power and Charging

Error Codes

Technical Specifications

Warranty Information

HIKE CREW HICPSBT Specifications

General IconGeneral
BrandHIKE CREW
ModelHICPSBT
CategoryWater Heater
TypePortable
FeaturesAdjustable Temperature