Need help?Do you have a question about the HIKOKI DH 45ME and is the answer not in the manual?
Guidelines for maintaining a safe and well-lit work environment to prevent accidents.
Precautions regarding the safe use of electrical power tools and their connections.
Guidance on selecting, using, and caring for power tools to ensure efficient and safe operation.
Importance of wearing ear protection due to potential hearing loss from noise exposure.
Instructions for using auxiliary handles to maintain control and prevent injury.
Safety advice for handling the tool to avoid electric shock from hidden wiring.
Warning about hot bits causing burns and precautions for safe handling.
Pre-operation check to confirm absence of hidden electric cables or conduits before drilling walls.
Importance of wearing a dust mask to protect health from generated dust.
Ensuring the power source matches the tool's requirements specified on the nameplate.
Verifying the power switch is off before connecting to power to prevent accidental startup.
Guidelines for using appropriate and short extension cords for extended reach.
Indicator light that illuminates when the power cord is plugged into an outlet.
Using the electronic control circuit to adjust rotation speed and impact rate based on operation.
Explanation of built-in protection circuits and troubleshooting via display lamp indications.
Step-by-step guide for drilling holes using the rotary hammer, including proper pressure.
Instructions for chiseling and crushing operations using the tool's own weight.
Procedure for switching to rotation and hammering mode, emphasizing stopping the motor first.
Guidance on switching to hammering mode and using chisels safely.
Instructions for attaching and adjusting the depth stopper for precise drilling.
Procedure for warming up the lubrication system in cold regions before operation.
How to activate and use the continuous operation feature for hammering mode.
Detailed steps for mounting, using, and removing taper shank drill bits and adapters.
Steps for securely mounting the core bit and its shank onto the rotary hammer.
Procedure for drilling holes with a core bit, including depth setting and force application.
Instructions on how to safely remove the core bit from the rotary hammer.
Importance of checking drill bits for sharpness and replacing or resharpening dull ones.
Regularly checking and tightening mounting screws to prevent hazards.
Ensuring the motor winding is protected from damage, oil, or water.
Guidance on authorized replacement of the power supply cord for safety.
Information on obtaining a list of service parts for repair purposes.
General| Brand | HIKOKI |
|---|---|
| Model | DH 45ME |
| Category | Rotary Hammer |
| Language | English |
To Next Page
