To Next PageTo Next Page
Need help?Do you have a question about the HIKOKI G 13VA and is the answer not in the manual?
Keep the workspace clean, well-lit, and free from distractions and hazards.
Ensure proper grounding, avoid wet conditions, and never abuse the power cord.
Stay alert, use PPE, avoid unintentional starting, and dress appropriately.
Use correct tool for application, maintain tools, store properly, and disconnect before adjustments.
Understand and prevent sudden reactions caused by snagging or pinching of rotating accessories.
Avoid jamming, excessive pressure, and position body correctly to prevent kickback.
Use correct sanding paper size and ensure proper attachment to avoid hazards.
Check wheel speed, dimensions, condition, and ensure guards are fitted correctly.
Details on variable speed, soft-start, kickback, and overload protection features.
List of included accessories with the power tool.
Describes the intended uses of the grinder, such as finishing and cutting.
Essential checks and preparations before using the power tool.
Ensure the power source conforms to the product's requirements.
Verify the power switch is in the OFF position before connecting.
Use a suitable, thick, and short extension cord when needed.
Instructions for correctly installing and positioning the wheel guard for safety.
Steps for attaching the auxiliary handles to the grinder body.
How to set the variable speed dial for different applications.
Warning about potential speed instability when near welding equipment.
Advice on using a residual current device for electrical safety.
Proper angles and techniques for effective and safe grinding.
Safety steps to take after switching off the tool.
Detailed instructions for mounting and removing grinding wheels and discs.
Checks for wheel integrity, mounting screw tightness, and general condition.
Guidance on checking carbon brush wear and replacing them.
Procedure and precautions for replacing the power tool's supply cord.
Guidance on caring for the motor unit to prevent damage.
Information on obtaining service parts and product modification policies.
General