HIKVISION 4 Series - Page 7

- 2 -
No.
Abbrev.
Name
Remarks
1
PWR
power indicator
If the switch is powered on, the indicator is
on.
2
SYS
System indicator
If the indicator is always on, the system
works normally.
3
/
2 SFP ports
Realizes the forward of gigabit Ethernet
optical signals.
4
/
8 RJ45 ports
Realizes the PoE function and forwards
10/100M Ethernet electrical signals
5
PoE
PoE indicator
corresponding to
each port
If the indicator is always on, the PoE works
normally.
If the indicator is off, the PoE does not work.
6
Lnk/Act
Lnk/Act indicator
corresponding to
each port
Indicator lamp, indicating detection
The indicator light is always bright,
indicating LINK,
The indicator light is always bright,
indicating LINK, indicating lights flashing,
indicating data transceiver.
Table 1-2 Parts at the front template of the 8 switch
Besides, 4/8 switch provides with a grounding column and a power socket.
Figure 1-2 Back template of the 8 switch