User Manual of Network Fisheye Camera
24
Figure 4-6 PTZ Control Panel
Table 4-5 Descriptions of PTZ Control Panel
Steps:
1. Click to select a PTZ View on the display window, and then the navigation box
appears on the Fisheye View and Panorama View.
2. Click the direction arrows on the PTZ control panel. The navigation box will
move in the corresponding pan/tilt direction.
3. Adjust zoom, focus and iris level of the PTZ view image.
4. Click-and-drag the slider on the speed bar to adjust the moving speed of PTZ
View when auto scan is enabled.
To Next Page
Loading...
Need help?
General
