Need help?Do you have a question about the HIKVISION DS-2CD6924G0-IHS and is the answer not in the manual?
General| Form factor | Dome |
|---|---|
| Mounting type | Ceiling |
| Product color | Black |
| Bluetooth | - |
| Ethernet LAN | Yes |
| Ethernet interface type | Gigabit Ethernet |
| Supported network protocols | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour |
| Sample rate | 48 kHz |
| Bit rate range | 16 - 192 Kbit/s |
| Audio formats supported | G.711, MP2L2, G.722.1, G.726, PCM |
| Total megapixels | - MP |
| Maximum resolution | 6480 x 1080 pixels |
| Video formats supported | H.264, H.265 |
| Supported graphics resolutions | 1920 x 1080 (HD 1080), 3840 x 2160 |
| Number of cameras | 1 |
| Fixed focal length | 6 mm |
| LED type | IR |
| Infra-red wavelength | 850 nm |
| Night vision distance | 20 m |
| Number of illumination LEDs | 4 |
| DC output voltage | 12 |
| Power source type | DC, PoE |
| Sensor type | CMOS |
| Operating temperature (T-T) | -40 - 60 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Pan range | 0 - 355 ° |
| Tilt angle range | 0 - 90 ° |
| Minimum illumination | 0.003 lx |
| Type | IP security camera |
| Languages support | English |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wired |
| Built-in HDD | No |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| Maximum memory card size | 256 GB |
Weight and Dimensions| Depth | 207.63 mm |
|---|---|
| Width | 189.5 mm |
| Height | 206.62 mm |
| Weight | 3000 g |
| Package type | Box |
| Package depth | 261 mm |
| Package width | 340 mm |
| Package height | 293 mm |
| Package weight | 5000 g |
Instructions for configuring the camera on a local area network.
Guide to connecting the camera to a wide area network using static or dynamic IP.
Steps to access and manage the camera using a web browser interface.
How to use the iVMS-4200 client software for camera management and live view.
Details of the live view interface, including menu bar, window, and toolbar functions.
Procedures for initiating live view and using PTZ controls, presets, and patrols.
Settings for live view, record files, and captured pictures saved locally.
System setup including basic info, time, RS232/RS485, DST, and image stitching.
Configuration of TCP/IP, DDNS, PPPoE, Port, and NAT settings for network access.
Advanced network configurations including SNMP, FTP, Email, HTTPS, QoS, 802.1X, and HTTP listening.
Adjusting video parameters like resolution, frame rate, bitrate, and encoding types.
Settings for audio encoding, input, volume, and displaying information on the video stream.
Adjusting brightness, contrast, saturation, exposure, day/night switch, and white balance.
Customizing on-screen display (OSD) and overlaying logos or images on the video feed.
Setting up alarm inputs, outputs, and handling exceptions like HDD errors or network disconnections.
Configuring advanced detection features like audio, scene change, intrusion, line crossing, and people density detection.
Setting up continuous, motion, or event-triggered recording and scheduled snapshots.
Adding and initializing network hard drives and defining storage quotas for recordings and pictures.
How to access, search, and play back recorded video files stored on network disks or SD cards.
Searching, viewing, and downloading captured pictures from storage.
Overview of SADP tool for searching, activating, and modifying network parameters of devices.
Steps to configure WAN, LAN, and port mapping on a TP-LINK router for camera access.
Information on device communication ports and common serial port commands.
To Next Page