Network Camera User Manual
94
including Notify Surveillance Center, Send Email, Upload to FTP/Memory
Card/NAS, Trigger Channel for recording and Trigger Alarm Output.
7. Click Save to save the settings.
Configuring Scene Change Detection
Purpose:
Scene change detection function detects the change of surveillance environment
affected by the external factors, such as the intentional rotation of the camera.
Some certain actions can be taken when the alarm is triggered.
Note: Scene change detection function varies according to different camera models.
Steps:
1. Enter the Scene Change Detection settings interface, Configuration > Event >
Smart Event > Scene Change Detection.
2. Select the Camera No.
Scene Change Detection
3. Check the checkbox of Enable to enable the function.
To Next Page
Loading...
