Network Camera User Manual
45
Log Searching
4. To export the log files, click Export to save the log files.
System Service
Purpose:
System service settings refer to the hardware service the camera supports.
Supported functions vary according to the different cameras. For the cameras
support IR Light, ABF (Auto Back Focus), Auto Defog, or Status LED, you can select to
enable or disable the corresponding service according to the actual demands.
ABF: When ABF function is enabled, you can click on PTZ control panel to realize
auxiliary focus.
Third Stream: For some models, third stream is not enabled by default. Check Enable
Third Stream to enable the function.
Enable Third Stream
To Next Page
Loading...
