Network Camera User Manual
80
Chapter 8 Image Settings
Purpose:
Follow the instructions in this chapter to configure the image parameters, including
display settings, OSD settings, and picture overlay.
Configuring Display Settings
Purpose:
Configure the image adjustment, exposure settings, day/night switch, backlight
settings, white balance, image enhancement, and video adjustment in display
settings.
Note: The display parameters vary according to the different camera models. Please
refer to the actual interface for details.
Steps:
1. Enter the Display Settings interface, Configuration > Image > Display Settings.
Display Settings
2. Set the image parameters of the camera.
Note: In order to guarantee the image quality in different illumination, it provides
two sets of parameters for users to configure.
Image Adjustment
To Next Page
Loading...
