Need help?Do you have a question about the HIKVISION DS-7204HQI-K1 and is the answer not in the manual?
General| Model | DS-7204HQI-K1 |
|---|---|
| HDMI Output | 1 |
| VGA Output | 1 |
| Two-Way Audio | Yes |
| Dual Stream | Yes |
| Synchronous Playback | 4-ch |
| USB Interface | 2 USB 2.0 |
| Power Supply | 12V DC |
| Working Temperature | -10 °C to +55 °C (14 °F to 131 °F) |
| Working Humidity | 10% to 90% |
| Video Input | 4 channels |
| HDTVI Input | 4 |
| AHD Input | 4 channels |
| HDCVI Input | 4 channels |
| CVBS Input | 4 channels |
| Audio Compression | G.711u |
| Audio Input | 1 channel |
| Audio Output | 1 channel |
| Video Compression | H.264 |
| Recording Resolution | 1080p/720p |
| Stream Type | Video, Video & Audio |
| Playback Resolution | 1080p/720p |
| Remote Connections | 10 |
| Network Protocols | TCP/IP, DHCP, DNS, PPPoE |
| SATA | 1 |
| Capacity | Up to 6 TB capacity for each disk |
| Network Interface | 1 RJ45 10M/100Mbps Ethernet |
| Consumption | ≤ 10W |
| Weight | 1.5 kg |
Covers managing hard disk drives, including capacity, network disks, and group management.
Guides on setting encoding parameters for video streams, including resolution and bitrate.
Explains how to set up automatic recording schedules for cameras based on time and day.
Details how to set up motion detection parameters, areas, and sensitivity.
Guides on configuring recording and capture actions triggered by alarm events.
Explains how to configure recording based on various events like motion, alarm, and VCA.
Explains how to configure redundant recording for enhanced data safety and reliability.
Covers methods for playing back recorded video files, including instant and normal search.
Guides on searching and playing back video files based on specific event types like motion or alarm.
Explains how to use Smart Playback to efficiently review video containing motion or VCA events.
Explains how to back up record files and pictures to various storage devices.
Details how to configure motion detection parameters, areas, and sensitivity.
Guides on setting up handling methods for external sensor alarms.
Explains how to detect video loss on a channel and configure alarm response actions.
Details how to detect video tampering and configure alarm response actions.
Details how to configure face detection to identify and react to faces in the surveillance scene.
Explains how to set up virtual lines for detecting objects crossing in specific directions.
Guides on configuring intrusion detection to identify objects entering or loitering in defined virtual regions.
Details how to detect objects entering a pre-defined virtual region.
Explains how to detect objects exiting a pre-defined virtual region.
Guides on detecting objects that loiter in a defined virtual region for a specific duration.
Details how to detect and alert when people gather in a defined virtual region.
Explains how to detect objects moving rapidly within a pre-defined virtual region.
Guides on detecting illegal parking in specified areas like highways or streets.
Details how to detect unattended objects or baggage left in a region.
Explains how to detect when objects are removed from a pre-defined region.
Guides on detecting abnormal sound events like sudden increases or decreases in audio intensity.
Details how to detect image blur caused by lens defocusing.
Explains how to detect changes in the surveillance environment due to external factors.
Guides on detecting intruders based on passive infrared (PIR) motion detection.
Guides on searching for captured face images and related video files based on specified conditions.
Explains how to search for suspicious behaviors detected by VCA analytics.
Details how to calculate and report the number of people entering or leaving a defined area.
Guides on analyzing customer visit times and dwell times using graphical heat map representations.
Covers basic network configuration, including IP address, gateway, and DNS settings.
Guides on initializing newly installed hard disk drives (HDDs) before they can be used with the DVR.
Explains how to configure alarms for HDD errors or abnormal statuses.
Guides on searching, viewing, and exporting system operation, alarm, and exception logs.
Guides on upgrading the DVR firmware using local backup devices or remote FTP servers.
Explains how to restore DVR parameters to factory default or inactive status.
Covers adding, deleting, editing, and assigning permissions for user accounts.
To Next Page
