Need help?Do you have a question about the HIKVISION DS-7204HGHI-F1 and is the answer not in the manual?
General| Voltage | 12 V |
|---|---|
| Product color | Black |
| Rack capacity | 1U |
| Audio output channels | 1.0 channels |
| Video compression formats | H.264, H.264+ |
| Ethernet LAN | Yes |
| Ethernet interface type | Fast Ethernet |
| Ethernet LAN (RJ-45) ports | 1 |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik Cloud P2P, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 6000 GB |
| Video input channels | 4 channels |
| USB 2.0 ports quantity | 2 |
| Power consumption (typical) | 8 W |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Weight | 1000 g |
|---|---|
| Dimensions (WxDxH) | 260 x 222 x 45 mm |
Guides the user through the initial device activation process, including setting an admin password.
Details the initial setup process using the startup wizard for basic configuration.
Provides instructions on how to activate and add IP cameras to the DVR system.
Explains how to set the parameters for controlling PTZ cameras.
Details setting camera presets, patrols, and patterns for PTZ control.
Describes how to access and use the PTZ control panel interface.
Guides on setting encoding parameters for video recording.
Explains how to set automatic recording and capture schedules.
Details setting motion detection parameters and configuring response actions.
Guides on configuring recording and capture triggered by alarm inputs.
Explains how to configure recording and capture for various VCA events.
Details manual recording and continuous capture setup prior to scheduled recording.
Explains enabling redundant recording for enhanced data safety and reliability.
Details how to manage HDDs in groups for organized storage.
Guides on enabling or disabling H.264+ for analog cameras with a single click.
Guides on using smart playback to efficiently review video with motion or VCA events.
Guides on setting motion detection parameters, areas, and response actions.
Details configuring alarm response actions such as full screen monitoring and email notifications.
Guides on configuring face detection rules and sensitivity.
Explains vehicle detection for traffic monitoring and license plate capture.
Details setting line crossing detection rules, direction, and sensitivity.
Guides on configuring intrusion detection rules, sensitivity, and percentage.
Guides on searching for detected face pictures and related video files.
Explains behavior analysis and searching for suspicious activities.
Guides on configuring general network settings like IP address and working mode.
Guides on configuring disk arrays using one-touch or manual methods.
Explains how to initialize newly installed HDDs before use.
Guides on adding and configuring NAS or IP SAN disks as network HDDs.
Details managing HDDs in groups for specific channel recording.
Explains configuring allocated storage quotas for individual cameras.
Guides on setting up cloud storage for uploading recorded files.
Explains how to check the status of installed HDDs for maintenance.
Guides on viewing HDD S.M.A.R.T. information for reliability monitoring.
Guides on configuring HDD error alarms for uninitialized or abnormal status.
Explains how to configure OSD settings like date, time, and camera name.
Guides on viewing and exporting DVR operation, alarm, and exception logs.
Guides on configuring general settings like output resolution and system time.
Explains various additional settings like device name and auto logout.
Guides on managing user accounts, including adding, deleting, and editing.
Offers solutions for common issues encountered during device operation.
To Next Page
