Need help?Do you have a question about the HIKVISION DS-7204HUHI-F2/N and is the answer not in the manual?
General| Video Input | 4 channels |
|---|---|
| Storage Interface | 1 SATA interface |
| Hard Disk Capacity | Up to 6TB |
| Power Supply | 12V DC |
| Operating Humidity | 10% to 90% |
| Video Output | HDMI, VGA |
| Compression | H.265+, H.265, H.264+, H.264 |
| Audio Input | 1 channel |
| Audio Output | 1 channel |
| Network Interface | 1 RJ45 10/100/1000Mbps self-adaptive Ethernet interface |
| USB Interface | 2 USB 2.0 |
| Operating Temperature | -10°C to +55°C |
| Weight | 1.5 kg |
Describes local monitoring capabilities including HDMI/VGA output resolutions and screen layout options.
Details HDD management features like capacity, network disk connection, and cloud storage support.
Covers recording types, POS triggered recording, channel-zero encoding, and playback functionalities.
Details alarm configuration, linkage actions, and handling of various exceptions like video loss and HDD errors.
Covers network interface configurations, supported protocols (TCP/IP, PPPoE, etc.), and remote access features.
Provides instructions on setting PTZ parameters for camera control, including baud rate and address configuration.
Guides on setting encoding parameters like resolution, frame rate, and bitrate for recording.
Explains how to set up recording and capture schedules for automatic operation based on time and events.
Details setting up motion detection parameters and configuring response actions like recording or monitoring.
Describes how to configure recording or capture triggered by external alarm inputs.
Covers event-based recording and capture, including VCA events like face detection and intrusion detection.
Explains how to manually initiate and stop recording or capture, overriding scheduled settings.
Details how to play back recorded video files using instant playback, normal search, and event search.
Explains backing up record files using USB or SATA devices via normal video/picture search or event search.
Guides on setting up motion detection areas, sensitivity, and response actions.
Details how to configure handling methods for external sensor alarms, including trigger channels and arming schedules.
Explains how to detect video loss for a channel and set up alarm response actions.
Guides on setting up video tampering detection, sensitivity, and response actions.
Details alarm response actions such as full screen monitoring, audible warning, and email notifications.
Guides on configuring face detection rules, sensitivity, and response actions.
Details vehicle detection for traffic monitoring, including lane configuration and license plate capture.
Explains setting up line crossing detection rules, direction, and sensitivity.
Guides on configuring intrusion detection rules, threshold, sensitivity, and percentage.
Guides on searching for detected face pictures and playing related video files.
Guides on configuring general network settings like working mode, NIC type, and IP address.
Details advanced network settings including PPPoE, Hik Cloud P2P, DDNS, NTP Server, NAT, and More Settings.
Guides on configuring RAID arrays for data redundancy and storage, covering one-touch and manual methods.
Provides steps to initialize newly installed HDDs before they can be used with the DVR.
Guides on adding allocated NAS or IP SAN disks to be used as network HDDs.
Details how to manage multiple HDDs in groups and assign channels to specific HDD groups.
Offers solutions for common issues like no image display, beep sound on startup, and playback problems.
To Next Page
