Need help?Do you have a question about the HIKVISION DS-7204HUHI-K1/P and is the answer not in the manual?
General| BNC input ports | 4 |
|---|---|
| Video input channels | 4 channels |
| USB 2.0 ports quantity | 2 |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 10000 GB |
| Ethernet LAN | Yes |
| Number of users | 32 user(s) |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF |
| Bit rate | 64 Kbit/s |
| Product color | Black |
| Video capturing speed | 30 fps |
| Audio formats supported | G.711 μ-law |
| Maximum video resolution | 2560 x 1440 pixels |
| Video compression formats | H.264, H.264+, H.265, H.265 Pro, H.265 Pro+, H.265+ |
| Analog signal format system | NTSC, PAL |
| Playback resolutions supported | 2560 x 1440, 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768 |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| DC voltage | 48 V |
| Power consumption (typical) | 40 W |
Weight and Dimensions| Depth | 242 mm |
|---|---|
| Width | 315 mm |
| Height | 45 mm |
| Weight | 1500 g |
Proper procedures for starting and shutting down the DVR.
Steps to activate the device by setting an admin password.
How to activate an IP camera before adding it.
Steps to add IP cameras detected online to the device.
How to perform various operations within the live view mode.
Setting video encoding parameters for recording.
Setting up recording schedules for different recording types.
Setting up motion detection parameters, areas, and sensitivity.
Configuring recording and capture triggered by alarms.
Setting up redundant recording for data safety.
Methods for playing back recorded video files.
Searching and playing back record files by date and time.
Interface for controlling playback progress and selecting channels.
Searching and playing back files based on event types.
Performing smart playback based on VCA or motion events.
Methods for backing up video and picture files.
Backing up files found via normal video search.
Backing up event-related record files using search criteria.
Setting up motion detection parameters, areas, and sensitivity.
Configuring handling methods for external sensor alarms.
Detecting video loss and configuring alarm response actions.
Detecting video tampering (lens covered) and configuring response actions.
Detecting faces in the video scene and triggering actions.
Detecting vehicles for traffic monitoring and license plate capture.
Detecting objects crossing a virtual line with configurable direction.
Detecting intrusions into predefined virtual regions.
Detecting objects entering a predefined virtual region.
Searching for detected face pictures and related video files.
Setting up basic network parameters like IP address and DNS.
Enabling and configuring Hik-Connect for remote access via mobile app/web.
Steps to initialize a newly installed hard disk drive.
To Next Page