HIKVISION DS-7316HUI-K4 - Configuring Overlay Channel

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 125
3) Set the font size to small, medium, or large.
4) Set the overlay time of the characters. The value ranges from 5 to 3600 sec.
5) Set the delay time of the characters. The value ranges from 5 to 3600 sec.
6) (Optional) Check the checkbox to enable the POS Overlay in Live View.
7) Select the font color for the characters.
You can adjust the size and position of the textbox on the POS settings interface live
view screen by dragging the frame.
3. Click Apply to activate the settings.
4. (Optional) Click Copy to copy the current settings to other POS(s).
Figure 170, Copy POS Settings
8.2 Configuring Overlay Channel
Purpose
You can assign the POS machine to the corresponding channel on which you want to
overlay.
1. Go to Menu > Configuration > POS > Overlay Channel.
2. Click to select an analog or IP camera from the camera list on the right, and then click a
POS item from the POS list you want to overlay on the selected camera.
3. Click or to go to the previous or next page of cameras.