Need help?Do you have a question about the HIKVISION DS-7308HQHI-K4 and is the answer not in the manual?
General| Bit rate | 64 Kbit/s |
|---|---|
| Internal | No |
| Product color | Black |
| Channels quantity | 8 channels |
| Dual stream support | Yes |
| Audio input channels | 4.0 channels |
| Audio output channels | 2.0 channels |
| Video capturing speed | 30 fps |
| Audio formats supported | G.711 μ-law |
| Maximum video resolution | 3840 x 2160 pixels |
| Video compression formats | H.264, H.264+, H.265, H.265 Pro, H.265 Pro+ |
| Analog signal format system | NTSC, PAL |
| Playback resolutions supported | 3840x2160, 2560x1440, 1920x1080, 1280x1024, 1280x720, 1024x768 |
| Audio input | 4x RCA |
| BNC input ports | 8 |
| Alarm input channels | 16 |
| Alarm output channels | 4 |
| USB 2.0 ports quantity | 2 |
| Number of users | 128 user(s) |
| Ethernet interface type | Gigabit Ethernet |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF, SNMP |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 10000 GB |
| AC input voltage | 100 - 240 V |
| Power consumption (max) | 40 W |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 390 mm |
|---|---|
| Width | 445 mm |
| Height | 70 mm |
| Weight | 5000 g |
Provides step-by-step instructions for powering the DVR on and off safely.
Explains the process of activating the DVR by setting an initial admin password.
Details how to configure and use an unlock pattern for device login security.
Guides users through essential initial settings via the startup wizard.
Covers procedures for logging into and out of the DVR system.
Details the steps required to log into the DVR using user credentials.
Explains how to reset the device password if it is forgotten.
Provides instructions for adding and connecting IP cameras to the DVR.
Details the process of activating IP cameras before adding them to the DVR.
Guides on discovering and adding IP cameras available on the network.
Details various functions and controls available during live video viewing.
Guides on customizing live view parameters like output, dwell time, and audio.
Explains how to set up PTZ parameters for connected cameras.
Guides on configuring specific PTZ movements like presets, patrols, and patterns.
Describes how to access and use the PTZ control interface.
Covers settings for video compression, bitrate, resolution, and frame rate.
Guides on setting up continuous, event, or motion-triggered recording schedules.
Explains how to set up motion detection zones and trigger recording actions.
Details how to configure recording or capture based on alarm inputs.
Covers configuring recording triggered by various VCA events.
Explains how to manually start or stop recording for channels.
Covers various methods for searching and playing back recorded video files.
Covers backing up video and picture files via normal or event search.
Explains how to manage connected backup storage devices like USB drives.
Details how to set up motion detection zones, sensitivity, and response actions.
Covers configuration for external sensor alarms and their linkage actions.
Explains how to configure actions like full-screen monitoring or email alerts for alarms.
Explains how to configure face detection rules and response actions.
Details how to configure vehicle detection for traffic monitoring.
Guides on setting up virtual lines for detecting objects crossing them.
Explains how to configure virtual regions for detecting intrusions.
Explains how to search for recorded face detection events.
Details basic network settings like IP address, gateway, and DNS.
Covers advanced network configurations beyond general settings.
Guides on enabling and configuring Hik-Connect for remote access.
Explains how to set up email notifications for events and alarms.
Explains the process of initializing a newly installed hard disk drive.
Guides on adding and managing network-attached storage (NAS) or IP SAN.
Details how to configure On-Screen Display settings like date, time, and camera name.
Covers adjustment of image parameters like brightness and contrast.
Details general system settings like language, resolution, and time zone.
Offers solutions for common issues encountered with the DVR.
To Next Page