Need help?Do you have a question about the HIKVISION DS-7300 Series and is the answer not in the manual?
General| Operating System | Embedded Linux |
|---|---|
| Video Input | 4/8/16 channels |
| Video Output | 1 × VGA, 1 × HDMI |
| Compression Format | H.264 |
| Audio Output | 1 channel |
| USB Interface | 2 × USB 2.0 |
| Operating Temperature | -10 °C ~ +55 °C (14 °F ~ 131 °F) |
| Operating Humidity | 10% to 90% |
Explains the correct procedures for powering the DVR on and off to ensure longevity.
Describes how to restart the DVR and secure access to its menus.
Guides users on how to configure the system's date and time for accurate event logging.
Details how to view live video streams from connected cameras.
Covers how to interact with and adjust individual camera feeds in live view mode.
Guides on customizing display settings for video outputs, screen layout, and audio.
Details the initial settings for recording quality, resolution, frame rate, and bit rate.
Explains how to set up a simple daily recording schedule for cameras.
Guides on setting up complex, multi-period daily recording schedules for optimized storage.
Covers setting up IP addresses, DNS, DDNS, and other network parameters for remote access.
Explains how to add, manage, and configure user accounts and their permissions.
Covers setting up motion detection, alarm inputs, and system exceptions.
Guides on configuring motion detection sensitivity, regions, and actions.
Guides on updating the DVR's system firmware via a USB storage device.
Explains how to reset the DVR to its factory default settings.
To Next Page