HIKVISION DS-7300 Series User Manual

Hikvision USA, Inc. – Series DS-7300 User Manual
15
Starting and Shutting Down Your DVR
Proper startup and shutdown procedures are crucial to expanding the life of your DVR.
To startup your DVR:
1. Ensure the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) be used in conjunction with the unit. The Power indicator LED
on the front panel should turn red, indicating the unit is receiving power.
2. Connect the DVR to a VGA monitor. You will only see the DVR menu system, when it’s
connected to a VGA monitor.
3. Press the POWER switch on the back rear panel. The Power indicator LED should turn blue. The
unit will begin to start.
4. After startup, the Power indicator LED will remain blue. A splash screen will be shown (Figure
7).
Figure 7. Startup Splash Screen
There are two proper ways to shutdown the DVR.
Option 1: Standard Shutdown
1. Enter the Shutdown menu shown in Figure 8 by going to Main Menu > Maintenance > Shutdown.
Figure 8. Shutdown Menu
2. Select the Shutdown button.

HIKVISION DS-7300 Series Specifications

General

Brand	HIKVISION
Model	DS-7300 Series
Category	DVR
Language	English