Hikvision USA, Inc. – Series DS-7300 User Manual
Figure 28. Playback Menu Example
4. Click on the desired date that is highlighted in light blue to search for recordings. If recordings exist, the
timeline will be filled with blue bars to designate recorded files. The playback marker, indicated by a green
vertical line will automatically jump to the beginning of the earliest recordings for the selected date. The marker
can be moved to any other location by clicking on the desired position on the blue bars.
5. Select the Play button in the Playback Controls to start playback of the recording.
Playing Back Recorded Files
After finding the recordings, you would like to playback (See Searching for Recorded Files on page 41), you
may use the Playback Controls to navigate through the recording. The controls found under Playback Controls
include:
Play Button: Button to playback recording.
Pause Button: Button to pause recording.
Decrease Speed Button: Button to decrease play speed.
Increase Speed Button: Button to increase play speed.
Hide Toolbar: Button to hide toolbar in playback mode.
Enter/Exit Full-Screen Mode: Buttons to enter into and exit out of full-screen mode.
Enable / Disable Audio: Buttons to enable and disable audio in playback mode.
Figure 29. Playback Control Buttons
To playback recorded files:
1. Search and select recording to playback in the Playback Interface.
2. Click the Play button to begin playback of selected recording and the Pause button to pause playback.
To Next Page
Loading...
Need help?
General