Interactive Tablet User Manual
24
6.8 Intelligent Temperature Control
The device monitors inner temperature in real time. When the temperature exceeds the set
warning or alarming temperature, the device will display prompt messages for you to take
measures in a timely manner.
Steps
1. Go to Settings → Auxiliary Functions → Intelligent Temperature Control.
Figure 6-11 Intelligent Temperature Control
2. Enable Intelligent Detection.
3. Slide the slider to set Warning Temperature and Alarming Temperature.
Note
● When the temperature exceeds the set warning temperature, the temperature in status bar
on the upper right corner turns red.
● When the temperature exceeds the set alarming temperature, the temperature information
pops up and prompts you to turn off the device.
6.9 Advanced Settings
Select Settings → Advanced Settings. You can set parameters as follows.
To Next Page
Loading...