To Next Page

To Previous Page

Note

●

If the combinaon authencaon of face and QR code is supported, and the QR code

shortcut key is disabled ( there is no QR code shortcut key icon in the authencaon page),

you can scan the QR code in the middle of the authencaon page to authencate.

●

You can select call type from Call Room, Call Center, and Call

Specied Room No.

Call Room

When you tap the call buon on the authencaon page, you should dial a room No. to

call.

Call Center

When you tap the call buon on the authencaon page, you can call the center directly.

Call Specied Room No.

You should set a room No. When you tap the call buon on the authencaon page, you

can call the

congured room directly without dialing.

Theme

You can set the theme of the prompt window on the authencaon page. You can select Theme

as Default/Simple. If select Simple, the live view of the

authencaon page will be disabled,

and in the meanwhile, the person's name, employee ID, face pictures will all be hidden.

Voice Sengs

You can enable/disable the voice prompt funcon and adjust the voice volume.

Note

You can set the voice volume between 0 and 10.

Time Sengs

Set the me zone, the device me and the DST.

Sleeping (s)

Set the device sleeping waing me (minute). When you are on the inial page and if you set

the sleeping me to 30 min, the device will sleep aer 30 min without any operaon.

Note

If you set the sleeping me to 0, the device will not enter sleeping mode.

Wait to Logout (s)

If there is no operaon within the congured me, the system will logout.

Select Language

Select the language according to actual needs.

Community No.

Set the device installed community No.

DS-K1T343 Series Face Recognion Terminal User Manual

HIKVISION DS-K1T343EFX User Manual

Questions and Answers: