Need help?Do you have a question about the HIKVISION DS-K1T341CMFW and is the answer not in the manual?
General| Type | Face recognition terminal |
|---|---|
| Face capacity | 3000 |
| Product color | Black, Grey |
| Cards capacity | 3000 cards |
| Event capacity | 150000 |
| Wiegand interface | Yes |
| Fingerprint reader | - |
| Authentication type | Access chip/card, Face recognition |
| Fingerprint sensor type | Optical |
| Face recognition accuracy | 99 % |
| Face recognition distance | 1 - 2 m |
| Face recognition duration | 0.2 s |
| Access chip/card reader type | Contactless |
| International Protection (IP) code | IP65 |
| Display type | LCD |
| Screen shape | Flat |
| Display diagonal | 4.3 \ |
| Maximum resolution | 272 x 480 pixels |
| Touchscreen technology | Capacitive |
| Sensor type | CMOS |
| Total megapixels | 2 MP |
| Front camera type | Dual camera |
| Operating system installed | Linux |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Input current | 2 A |
| Input voltage | 12 - 24 V |
| Power consumption (typical) | 10 W |
| Operating temperature (T-T) | -30 - 60 °C |
Critical warnings for serious injury or death if safeguards are neglected.
Precautions to prevent potential injury or material damage.
Configuring network settings (Wired Network or Wi-Fi).
Configuring network and communication parameters.
Adding face pictures for user authentication.
Adding fingerprint data for user authentication.
Adding card information for user authentication.
To Next Page