Need help?Do you have a question about the HIKVISION DS-K1T342EWX and is the answer not in the manual?
General| Resolution | 1024 x 600 |
|---|---|
| Operating System | Linux |
| RAM | 1 GB |
| Storage | 8 GB |
| Face Recognition Distance | 0.3 m to 1.5 m |
| Face Recognition Duration | < 0.2 s |
| Event Capacity | 100, 000 |
| Audio | Built-in speaker and microphone |
| Working Humidity | 10% to 90% (non-condensing) |
| Screen Resolution | 1024 x 600 |
| Camera | 2 MP |
| Processor | Quad-core |
| Communication | TCP/IP |
| Power Supply | 12V DC |
| Face Recognition Accuracy | 99% |
| Card Capacity | 3, 000 |
| Wiegand | Wiegand output |
| Installation | Wall-mounted |
| Screen Size | 7 inch |
Explanation of device terminals including power input, RS-485, Wiegand, and door lock.
Steps to activate the device directly from its interface after initial power-on.
Instructions for activating the device using a web browser and IP address.
Procedures for logging into the device as an administrator or with activation password.
Configuration for network, Wi-Fi, RS-485, Wiegand, and platform access.
Adding, editing, and managing users, including face, fingerprint, and card credentials.
Customizing parameters for face and fingerprint recognition performance.
Configuring access control rules, authentication modes, and door settings.
To Next Page