HIKVISION DS-K1T342EWX User Manual

Note
If you change the persons' access informaon or other related informaon, you will view the
promptAccess Group to Be Applied on the right corner of the client.
You can click the prompt to apply the changed data to the device. You can select either Apply
Now or Apply Later.
Figure 10-3 Data Synchronizaon
10.7 Congure Advanced Funcons
You can congure the advanced funcons of access control to meet some special requirements in
dierent scene.
Note
●
For the card related funcons(the type of access control card), only the card(s) with access group
applied will be listed when adding cards.
●
The advanced funcons should be supported by the device.
●
Hover the cursor on the Advanced Funcon, and then Click to customize the advanced
funcon(s) to be displayed.
10.7.1 Congure Device Parameters
Aer adding the access control device, you can congure the parameters of access control device,
access control points.
DS-K1T342 Series Face Recognion Terminal User Manual
170

HIKVISION DS-K1T342EWX Specifications

General

Resolution	1024 x 600
Operating System	Linux
RAM	1 GB
Storage	8 GB
Face Recognition Distance	0.3 m to 1.5 m
Face Recognition Duration	< 0.2 s
Event Capacity	100, 000
Audio	Built-in speaker and microphone
Working Humidity	10% to 90% (non-condensing)
Screen Resolution	1024 x 600
Camera	2 MP
Processor	Quad-core
Communication	TCP/IP
Power Supply	12V DC
Face Recognition Accuracy	99%
Card Capacity	3, 000
Wiegand	Wiegand output
Installation	Wall-mounted
Screen Size	7 inch