EasyManuals Logo

HIKVISION DS-K1T341CMFW User Manual

HIKVISION DS-K1T341CMFW
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #198 background imageLoading...
Page #198 background image
Edit Linkage
Sengs
Select the congured linkage sengs in the device list and you can edit its
event source parameters, including event source and linkage target.
9.9 Control Door Status
You can control the status for the door(s), including unlock door, locking door, remaining the door
unlock, remaining the door locked, remain all unlocked, etc.
Before You Start
Add person and assign access authorizaon to designed person, and person will have the access
authorizaon to the access points (doors). For details, refer to Person Management and Set
Access Group to Assign Access Authorizaon to Persons .
Make sure the
operaon user has the permission of the access points (doors). For details, refer
to .
Steps
1.
Click Monitoring to enter the status monitoring page.
2.
Select an access point group on the upper-right corner.
Note
For managing the access point group, refer to Group Management .
The doors in the selected access control group will display.
3.
Click a door icon to select a door, or press Ctrl and select
mulple doors.
Note
For Remain All Unlocked and Remain All Locked, ignore this step.
4.
Click the following buons to control the door.
Unlock
When the door is locked, unlock it and it will be open for once. Aer the open duraon, the
door will be closed and locked again
automacally.
Lock
When the door is unlocked, lock it and it will be closed. The person who has the access
authorizaon can access the door with credenals.
Remain Unlocked
The door will be unlocked (no maer closed or open). All the persons can access the door
with no
credenals required.
Remain Locked
The door will be closed and locked. No person can access the door even if he/she has the
authorized credenals, except the super users.
Remain All Unlocked
DS-K1T341C Series Face Recognion Terminal User Manual
182

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K1T341CMFW and is the answer not in the manual?

HIKVISION DS-K1T341CMFW Specifications

General IconGeneral
TypeFace recognition terminal
Face capacity3000
Product colorBlack, Grey
Cards capacity3000 cards
Event capacity150000
Wiegand interfaceYes
Fingerprint reader-
Authentication typeAccess chip/card, Face recognition
Fingerprint sensor typeOptical
Face recognition accuracy99 %
Face recognition distance1 - 2 m
Face recognition duration0.2 s
Access chip/card reader typeContactless
International Protection (IP) codeIP65
Display typeLCD
Screen shapeFlat
Display diagonal4.3 \
Maximum resolution272 x 480 pixels
Touchscreen technologyCapacitive
Sensor typeCMOS
Total megapixels2 MP
Front camera typeDual camera
Operating system installedLinux
Ethernet LAN data rates10, 100 Mbit/s
Input current2 A
Input voltage12 - 24 V
Power consumption (typical)10 W
Operating temperature (T-T)-30 - 60 °C

Related product manuals