EasyManuals Logo

HIKVISION DS-K1T341CMFW User Manual

HIKVISION DS-K1T341CMFW
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #117 background imageLoading...
Page #117 background image
Steps
1.
Go to Conguraon → System → Security Cercate Management .
2.
Create an ID in the Inport CA Cercate area.
Note
The input cercate ID cannot be the same as the exisng ones.
3.
Upload a
cercate le from the local.
4.
Click Install.
8.5.10 Change Administrator's Password
Steps
1.
Click Conguraon → User Management .
2.
Click
.
3.
Enter the old password and create a new password.
4.
Conrm the new password.
5.
Click OK.
Cauon
The password strength of the device can be automacally checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can
beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
8.5.11 View Device Arming/Disarming Informaon
View device arming type and arming IP address.
Go to Conguraon → Arming/Disarming Informaon .
You can view the device arming/disarming
informaon. Click Refresh to refresh the page.
8.5.12 Network
Sengs
Set TCP/IP, port, report strategy and plaorm access.
DS-K1T341C Series Face Recognion Terminal User Manual
101

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K1T341CMFW and is the answer not in the manual?

HIKVISION DS-K1T341CMFW Specifications

General IconGeneral
TypeFace recognition terminal
Face capacity3000
Product colorBlack, Grey
Cards capacity3000 cards
Event capacity150000
Wiegand interfaceYes
Fingerprint reader-
Authentication typeAccess chip/card, Face recognition
Fingerprint sensor typeOptical
Face recognition accuracy99 %
Face recognition distance1 - 2 m
Face recognition duration0.2 s
Access chip/card reader typeContactless
International Protection (IP) codeIP65
Display typeLCD
Screen shapeFlat
Display diagonal4.3 \
Maximum resolution272 x 480 pixels
Touchscreen technologyCapacitive
Sensor typeCMOS
Total megapixels2 MP
Front camera typeDual camera
Operating system installedLinux
Ethernet LAN data rates10, 100 Mbit/s
Input current2 A
Input voltage12 - 24 V
Power consumption (typical)10 W
Operating temperature (T-T)-30 - 60 °C

Related product manuals