Figure 7-17 Maintenance Page
System Informaon
You can view the device informaon including serial No., rmware version, MCU version, MAC
address,
producon data, device QR code, open source code license.
Note
The page may vary according to dierent device models. Refers to the actual page for details.
Capacity
You can view the number of administrator, user, face picture, card, and event.
Note
Parts of the device models support displaying the ngerprint number. Refers to the actual page
for details.
Upgrade
Plug the USB ash drive in the device USB interface. Tap Upgrade → OK , and the device will
read the digicap.dav le in the USB ash drive to start upgrading.
Unlink APP Account
Unlink the Hik-Connect account from the plaorm.
Restore to Factory
All parameters will be restored to the factory sengs. The system will reboot to take eect.
Restore to Default
DS-K1T343 Series Face Recognion Terminal User Manual
60