HIKVISION DS-K1T343EFX User Manual

Select Indoor or Others according to actual environment. In the outdoor scene, indoor scene
near the window, or bad environment, you can choose Others.
Note
If the device is not acvated by other tools, the device uses indoor as the environment mode by
default.
Face
Recognion Mode
Normal Mode
The device uses a camera to perform face recognion.
Deep Mode
It is applicable for for more complex environments, and the range of people recognized is
wider.
Note
●
The two modes cannot be compable with each other. Do not change the mode once it is
selected. If you change the mode, all face pictures of the previous mode will be cleared.
●
In the deep mode, you can add the face pictures only via the user adding funcon of the
device or the enrollment
staon. It is not supported to add face pictures via pictures
imporng.
The device uses a camera to perform face recognion.
Connuous Face Recognion Interval (s)
Set the me interval between two connuous face recognions when authencang.
Note
Value Range: 1 to 10.
1:1 Matching Threshold
Set the matching threshold when authencang via 1:1 matching mode. The larger the value,
the smaller the false accept rate and the larger the false rejecon rate.
1:N Matching Threshold
Set the matching threshold when authencang via 1:N matching mode. The larger the value,
the smaller the false accept rate and the larger the false
rejecon rate. The maximum value is
100.
Face Recognion Timeout Value (s)
Congure the meout period for face recognion. If the face recognion me exceeds the
congured value, the device will prompt the face recognion meout.
Face with Mask Detecon
DS-K1T343 Series Face Recognion Terminal User Manual
76

HIKVISION DS-K1T343EFX Specifications

General

Brand	HIKVISION
Model	DS-K1T343EFX
Category	Touch terminals
Language	English