Access Control Terminal·User Manual
107
For this authentication mode, the card swiping operation cannot be
replaced by entering the card No..
For password settings, please refer to Section 16.2.3 Normal Card.
For models DS-1T802M and DS-1T802E, only two kinds of card reader
authentication are supported: Swipe Card, and Swipe Card Password.
Steps:
1. Click Card Reader Authentication tab and select a card reader.
2. Select a card reader authentication type from the dropdown list.
Fingerprint: The door can open by only inputting the fingerprint.
Swipe Card: The door can open by only swiping the card.
Fingerprint/Swipe Card: The door can open by inputting the fingerprint or
swiping the card.
Swipe Card/Password: The door can open by inputting the password or
swiping the card.
Fingerprint Password: The door can open by both inputting the password
and inputting the fingerprint.
Swipe Card Password: The door can open by both inputting the password
and swiping the card.
Fingerprint Swipe Card: The door can open by both inputting the
fingerprint and swiping the card.
Fingerprint Swipe Card Password: The door can open by both inputting
the fingerprint, inputting the password, and swiping the card.
3. Click and drag your mouse on a day to draw a blue bar on the schedule,
which means in that period of time, the password authentication is valid.
To Next Page
Loading...
